EFFICIENCY OF THE QUICKLY COOLED ALTI5 ALLOY UNDER THE CONDITIONS OF THE DIRECT THERMAL RHEOLITIA METHOD

Authors

  • В. И. Белик Физико-технологический институт металлов и сплавов НАН Украины, Киев
  • А. Г. Пригунова Физико-технологический институт металлов и сплавов НАН Украины, Киев
  • В.М. Дука Физико-технологический институт металлов и сплавов НАН Украины, Киев
  • А. И. Семенченко Физико-технологический институт металлов и сплавов НАН Украины, Киев
  • Т. Г. Цир Физико-технологический институт металлов и сплавов НАН Украины, Киев

Keywords:

globular structure, DTM, AK7ч alloy, modification, master alloy obtained by the rapid cooling method, AlTi5B, AlTi5B1

Abstract

To obtain ingots for rheocasting process from AK7ч alloy using DTM technology, the efficiency of the AlTi5 master alloy obtained by the rapid cooling method is studied. It has been established that modifying the melt by AlTi5B1 master alloy as a rod and AlTi5 master alloy obtained by the rapid cooling method extends the temperature range for obtaining a globular structure. The efficiency of the AlTi5 master alloy is higher due to the more dispersed intermetallides that perform the function of the crystallization centers.

Author Biographies

В. И. Белик, Физико-технологический институт металлов и сплавов НАН Украины, Киев

канд.техн. наук, ст. науч. сотр.

А. Г. Пригунова, Физико-технологический институт металлов и сплавов НАН Украины, Киев

д-р техн. наук, зав. отделом

В.М. Дука, Физико-технологический институт металлов и сплавов НАН Украины, Киев

мл. науч. сотр.

А. И. Семенченко, Физико-технологический институт металлов и сплавов НАН Украины, Киев

канд.техн. наук

Т. Г. Цир, Физико-технологический институт металлов и сплавов НАН Украины, Киев

мл. науч. сотр.

References

Bondarev, B. I., Napalkov, V. I., Tararichkin, V. I. (1979) Modifitcirovanie aliuminievih deformiruemih splavov [Modification of aluminum deformable alloys]. Moscow: Metallurgia, 224 p. [in Russian].

Mihalenkov, K. V. Obrabotka siluminov promishlennimi zernoizmelchaiuchimi ligaturami [Processing of silumin by industrial granulating ligatures]. URL: www.fhotm.kpi.ua/sworks/03/mykhalenkov_manuscript_2008_1.pdf. [in Russian].

Filippova, I. A. (2011) Issledovanie i razrabotka modifikatorov, zakalennykh iz zhidkogo sostoyaniya, i tekhnologii modifitsirovaniya doevtekticheskikh siluminov s tselyu polucheniya vysokokachestvennykh otlivok transportnogo mashinostroeniya [Research and development of modifiers hardened from liquid state, and technology for modifying pre-eutectic silumin with the aim of obtaining high-quality castings of transport engineering]. Extended abstract of candidate’s thesis. Moskow, P. 24. [in Russian].

Browne, D. J., Hussey M. J., Carr A. J. and Brabazon D. (2003) Direct thermal method: new process for development of globular alloy microstructure. International Journal of CastMetals Research, Vol. 16, No. 4, р.418–426 [in English].

Krivopalov, D. S. (2016) Primenenie mikrokristallicheskih modifikatorov pri podgotovke aliuminievih rasplavov k litiu s celiu povishenia kachestva litih izdeli [Application of microcrystalline modifiers in the preparation of aluminum melts for casting in order to improve the quality of cast products]. Extended abstract of candidate’s thesis. Nizhnii Novgorod, p. 20.

Downloads

Published

01-08-2018

How to Cite

Белик, В. И. ., Пригунова, А. Г. ., Дука, В. ., Семенченко, А. И. ., & Цир, Т. Г. . (2018). EFFICIENCY OF THE QUICKLY COOLED ALTI5 ALLOY UNDER THE CONDITIONS OF THE DIRECT THERMAL RHEOLITIA METHOD. Casting Processes, 130(4), 3–11. Retrieved from https://www.plit-periodical.org.ua/index.php/plit/article/view/170

Issue

Casting processes №4 (130) 2018

Section

CRYSTALLIZATION AND STRUCTURE FORMATION OF ALLOYS

License

Copyright (c) 2018 В. И. Белик, А. Г. Пригунова, В.М. Дука, А. И. Семенченко, Т. Г. Цир

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Most read articles by the same author(s)

1 2 > >>