Features of electrohydropulse processing of the melt in foundry technologies
Keywords:
melt, electrohydropulse treatment, technological scheme, structure, propertiesAbstract
Various technological schemes of electrohydropulse treatment of melts are considered. It is shown that the technological scheme with the waveguide immersed in the melt is most effective. The efficiency of electrohydropulse treatment of aluminum alloy melts has been experimentally proven to form a favorable structure and properties of castings.
References
Tsurkin, V. N. (2009) Printsipy sistemnogo podkhoda k vyboru metodov vnepechnoy obrabotki rasplava [Principles of the system approach to the choice of methods for secondary processing of melt]. Metall i lite Ukrainy, no. 7–8, pp. 12−16 [in Russian].
Pilipenko, V. A., Smirnov, A. A. (1997) Optimizatsiya vybora tekhnologicheskoy skhemy vibroimpulsnoy obrabotki dlya povysheniya kachestva promyshlennykh slitkov i zagotovok [Optimization of the choice of the technological scheme of vibration treatment to improve the quality of
industrial ingots and blanks]. Metall i lite Ukrainy, no. 1, pp. 8−13 [in Russian].
Gulyy, G. A. (1990) Nauchnye osnovy razryadnoimpulsnykh tekhnologiy [Scientific foundations of discharge impulse technologies]. K.: Naukova dumka, 208 p. [in Russian].
Pozdeev, P. I., Tsarenko, B. I., Butakov, B. I., Malyushevskiy, P. P. (1985) Elektrorazryadnye generatory uprugikh kolebaniy [Electric discharge oscillators of elastic oscillations]. K.: Naukova dumka, 172 p. [in Russian].
Korytov, V. A. (1987) Formirovanie otlivki iz alyuminievykh splavov pri nalozhenii vibroimpulsnykh nagruzok. Oborudovanie i tekhnologiya vysokovoltnogo razryada v zhidkosti [Formation of casting from aluminum alloys when applying vibroimpulse loads. Equipment and technology of highvoltage discharge in a liquid]. K.: Naukova dumka, pp. 79−83. [in Russian].
Yefimov, V. A., Eldarkhanov, A. S. (2004) Tekhnologii sovremennoy metallurgii [Technologies of modern metallurgy]. Moscow: Novye tekhnologii, 784 p. [in Russian].
Dorofeev, S. A., Fomenko, K. P. (1983) Opredelenie effektivnosti udarnogo vozdeystviya, sozdavaemogo elektrogidravlicheskim vibratorom, s pomoshchyu kreshernykh datchikov [Determination of the effectiveness of the shock impact produced by the electrohydraulic vibrator, using cross sensors]. Vliyanie vneshnikh vozdeystviy na zhidkiy i kristallizuyushchiysya metall: Sb. nauchnykh trudov. K.: IPL AN USSR, pp. 87−90. [in Russian].
Bazin, Yu. A., Yemelyanov, A. V., Klimenko, Ye. A. (1988) Vysokotemperaturnaya rentgenovskaya kamera dlya izmereniya strukturnykh kharakteristik zhidkikh metallov [High-temperature X-ray chamber for measuring the structural characteristics of liquid metals]. Zavodskaya laboratoriya, no. 10, pp. 34−35 [in Russian].
Fedchenko, N. A. (2001) Povyshenie kachestva splavov na osnove alyuminiya putem ispolzovaniya elektrogidroimpulsnoy obrabotki [Improving the quality of aluminum-based alloys by using electrohydropulse treatment]: Extended abstract of candidate’s thesis. Kharkov: KhNADU, 19 p. [in Russian].
Dyachenko, S. S., Fedchenko, N. A. (2005) Mekhanіzm vplivu parametrіv elektrogіdroіmpulsnoi obrobki rozplavu na strukturnі zmіny v metalі [Mehanizm vplyvu parametr in electropneumatic impulse claddings on a structure in metal]. Metaloznavstvo ta obrobka metalіv, no. 2, pp. 29−31. [in Russian].
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Н. А. Федченко, А. В. Иванов
This work is licensed under a Creative Commons Attribution 4.0 International License.
