Department of mathematical methods of research and informational and computer technologies is part of PTIMA NAS of Ukraine during 35 years

Authors

  • N. I. Tarasevich Physico-technological Institute of Metals and Alloys NAS of Ukraine, Kyiv
  • I. V. Korniets Physico-technological Institute of Metals and Alloys NAS of Ukraine, Kyiv

Keywords:

mathematical simulation, thermal physics, mass transfer, ingot, casting, solidification, information technologies

Abstract

The historical survey of works executed by the Department of mathematical methods of research and informational and computer technologies in accordance with its scientific direction in the branch of mathematical and computer simulation of physical and technological processes of foundry and metallurgy so as in the information technologies is presented.

Author Biographies

N. I. Tarasevich, Physico-technological Institute of Metals and Alloys NAS of Ukraine, Kyiv

Doctor of Engineering Sciences, Senior Researcher, Head of Department

I. V. Korniets, Physico-technological Institute of Metals and Alloys NAS of Ukraine, Kyiv

Candidate of Engineering Sciences, Senior Researcher, Deputy Head of Department

References

Tarasevich, N. I., Shelkovnikova, L. P., Korniets, I. V. (1988) Study of the formation of large-sized centrifugal castings. Kiev, IPL AN USSR, preprint, 43 s. [in Russian].

Shevchenko, A. I., Tarasevich, N. I., Korniets, I. V., Kutuzov, V. P., Shelkovnikova, L. P. (1987) Mathematical model of centrifugal casting of large long castings Kraevyie zadachi. PPI, Perm, pp. 73−81 [in Russian].

Tarasevich, N. I., Kutuzov, V.P., Didenko, V.K., Korniets, I.V. (1988) Study of process of solidification of double-layer mill rolls for mill 5000. Novoe v mehanizatsii chernoy metallurgii. Dnepropetrovsk, NPO «Chermetmehanizatsiya», pp. 5−10 [in Russian].

Tarasevich, N.I., Shelkovnikova, L.P., Korniets, I.V. (1992) Numerical modeling of the formation of centrifugally cast large-sized castings. Protsessy litya, no. 4, pp. 35−42 [in Russian].

Zatulovskiy, S.S., Demchenko, V.F., Tarasevich, N.I., Yudovich, A.A. (1981) Study of the influence of technological parameters and dispersed inoculators on the solidification of continuous varietal casting by the method of mathematical modeling. Nepreryivnoe lite. M.: Metallurgiya, no. 7, pp. 5−9. [in Russian].

Tarasevich, N.I., Korniets, I.V. Martyinyuk, V.V. (1993) Some thermophysical studies of the formation of cast shot. Protsessy litya, no. 3, pp. 20−26 [in Russian].

Tarasevich ,N.I., Korniets, I.V. (1990) Mathematical modeling of the formation of cast composites reinforced with granules. Problemy kristallizatsii splavov i kompyuternoe modelirovanie. Izhevsk: UdGU, pp. 35−38. [in Russian].

Tarasevich, N.I., Korniets, I.V., Zatulovskiy, A.S. (1995) Mathematical modeling of the formation of cast composites reinforced with granules. Protsessy litya, no. 4, pp. 40−49 [in Russian].

Korniets, I.V. (1997) Computer Prediction System for Cast Composite Materials. Protsessy litya, no. 4, pp. 64−69 [in Russian].

Tarasevich, N.I., Korniets, I.V. (1989) Numerical simulation of solidification of a limited volume of liquid metal with a massive internal cooler, taking into account external effects on the free surface. Chislennyie metodyi mehaniki sploshnoy sredyi. KGU: Krasnoyarsk, pp. 21−30 [in Russian].

Tarasevich, N.I., Korniets, I.V., Shelkovnikova, L.P. (1991) Modeling of the formation of large flat ingots. Izvestiya VUZov. Chernaya metallurgiya, no. 12, pp. 56−58 [in Russian].

Tarasevich, N.I. (1997) The effect of pressure on the formation of a gas gap during solidification of steel castings. Protsessy litya, no. 1, pp. 23−31. [in Russian].

Tarasevich, N.I., Efimov, V.A., Korniets, I.V. (1994) To the question of controlling the process of solidification of the ingot by regulating the intensity of the external heat removal. Protsessy litya, no. 4, pp. 3−10 [in Russian].

Tarasevich, N.I., Korniets, I.V., Osipov, V.P., Dubrovin, E.Yu. (1992) Some thermophysical features of solidification of sheet ingots. Protsessy litya, no.1, pp. 38−44. [in Russian].

Tarasevich, N.I., Korniets, I.V., Tarasevich, I.N. (2014) Selection of optimal heat removal conditions from the side surface of a continuously cast billet in th e secondary cooling zone. Metall i lite Ukrainy, no.10, pp.8−12 [in Russian].

Pereloma, V.A., Tarasevich, N.I., Liker, R.A. (1995) Investigation of thermal processes in the laser processing of iron-carbon alloys.Protsessy litya,no. 2, pp.38−48 [in Russian].

Tarasevich, N.I., Ladohin, S.V., Lapshuk, T.V. (1989) Estimation of parameters of electron-beam melting of aluminum alloy in a skull crucible. Problemyi spetsialnoy elektrometallurgii, no.3, pp. 68−70. [in Russian].

Tarasevich, N.I., Medovar, L.B., Korniets, I.V. (1991) The effect of heat removal intensity on the solidification rate of horizontal non-casting heat ingots. Fiziko-himicheskie osnovyi metallurgicheskih protsessov. Moscow, pp. 56−57. [in Russian].

Borisov, A.G., Tarasevich, N.I., Korniets, I.V., Semenchenko, A.I. (2013) Predicting Type of Morphology of Primary Phase in a Thin-Walled Metal Mould. The Physics of Metals and Metallography − Pleiades Publishing, Ltd. Vol. 114, no. 3, pp. 242−245 [in Russian].

Tarasevich, M.I., Korniets, I.V. (1996) Forecasting of structural zones of casting on the basis of thermophysical research. Metaloznavstvo ta obrobka metalIv, no. 4, pp.61–63 [in Ukrainian].

Tarasevich, N.I., Bublikov, V.B., Korniets, I.V., Sumenkova, V.V. (2007) Thermophysics of interaction of modifiers with liquid iron. Protsessy litya, no.6, pp. 39−46. [in Russian].

Naidek, V.L., Tarasevich, N.I., Korniets, I.V., Tarasevich, I.N. Computer modelling for thin strip twin-roll casting. Steel in Translation, Vol. 47, no. 7, pp. 497−503. [in English].

Korniets, I.V., Tarasevich, I.N., Stas, I.N., Ryibitskiy, A.I. (2012) Influence of thermo-temporal parameters of crystallization on the structure formation of carbon steels. Liteynoe proizvodstvo: tehnologii, materialyi, oborudovanie, ekonomika i ekologiya. Kiev, pp.164−165. [in Russian].

Tarasevich, N.I., Litovka, V.I., Tokareva, O.O. (1987) Prediction of the structure and properties of ductile cast iron. Progressivnyie tehnologii, avtomatizatsiya i primenenie EVM v liteynom proizvodstve, pp. 41−44. [in Russian].

Litovka, V.I., Tarasevich, N.I. (1995) Computer bank for high-strength ductile cast iron. Kompyuternoe materialovedenie i informatizatsiya sozdaniya novyih veschestv i materialov, pp. 41−42. [in Russian].

Tarasevich, N.I., Kondratyuk, S.E., Kasatkin, O.G. (1998) Prediction of the mechanical properties of steel castings due to changes in the thermal parameters of solidification. Protsessy litya, no. 4, pp. 53–58. [in Russian].

Published

08-12-2018

How to Cite

Tarasevich М. І. ., & Korniets І. В. . (2018). Department of mathematical methods of research and informational and computer technologies is part of PTIMA NAS of Ukraine during 35 years. Casting Processes, 132(6), 36–44. Retrieved from https://www.plit-periodical.org.ua/index.php/plit/article/view/158

Issue

Section

PROBLEMS OF AUTOMATION, MECHANIZATION AND COMPUTERIZATON

Similar Articles

You may also start an advanced similarity search for this article.